| Energy Saving Products Ltd. - Building a Better Building | |
| ESP Press Release 401.03 - Click here to download the pdf version. | |
|
|
|
|
|
|
|
The design of the new building was completed by Leon and his sons (Tim, in Technical Support and Training, and Daniel, in charge of Electrical Research and Development), working closely with the General Contractor on the reconstruction of the new manufacturing plant. “We came up with our own plans from the start of the design to the finish,” says Daniel. “We wanted practical energy-efficiency, and of course we also wanted to showcase our Hi-Velocity System for everyone visiting the factory.” As a result, ESP has introduced a much improved training area to better instruct customers and showcase their products. |
|
|
High-efficiency chillers, boilers and solar panels were also included in the new plans. For Leon, “it was only natural to go to the next level of sustainability.” |
|
|
Each air handling unit utilizes a heat recovery ventilator (HRV). These recover thermal energy from the air being exhausted and transfer it to the fresh air being brought into the building. This will save energy by minimizing the heating load in the winter. Each air handling unit also uses the company’s own HE PS air purification system, which utilizes photo-catalytic technology to eliminate VOC’s, CO, and odours from the air. The air handling units are also equipped with CO2 (Carbon Dioxide) monitoring sensors that modulate the amount of fresh air and exhaust air to provide the building with optimal indoor air quality.photo-catalytic technology to eliminate VOC’s, CO, and odours from the air. The air handling units are also equipped with CO2 (Carbon Dioxide) monitoring sensors that modulate the amount of fresh air and exhaust air to provide the building with optimal indoor air quality. |
|
|
Another renewable energy system being incorporated in this building is a solar collector system to supply supplementary heat to the building and hot water tank. These are constructed of a bank of tubes that absorb thermal energy from the sun and exchange this heat to water flowing through the tubes. This is done to reduce the load on the boilers and take advantage of our planets free energy.
|
|
|
|
Watch a video featuring our new building!
(Opens new window) |
CEO Leon Prevost was in Chicago attending the AHR Expo in
January 2009 when he got a phone call from his wife (ESP
President Elaine Prevost) telling him of the late night fire.
Although devastated, Leon’s determination set in, and he began
immediately to look forward. “I was not going to let this
tragedy get us down” he said.
With great resolution and a lot of hard work from employees,
suppliers, customers, friends and family, the company was up and
running in a temporary facility within two and a half weeks of
the fire.
The
company has invested 22 months to build a leading edge
manufacturing facility, which will be certified under the LEED
(Leadership in Energy and Environmental Design) program. This
program encourages the adoption of sustainable green building
design techniques and construction practices, through the
creation and implementation of universally understood and
accepted tools, materials and performance criteria, pertaining
to all aspects of the building. “The whole idea behind LEED is
not only energy efficiency, sustainable design or indoor air
quality, but also an overall improvement of construction
practices to reduce waste and/or contamination caused by the
construction process,” said Daniel. “The new factory reduces our
energy usage by 60 percent.”
The
warehouse and office space are outfitted with multiple air
handling systems with numerous zones, allowing each occupant to
control the temperature in their own space. This promotes
productivity, comfort and well-being, as well as demonstrating a
fully energy efficient system.
What began as a disaster has turned into a new vision. ESP
offers it’s customers a solid core of youth tempered with age
and experience in their combined commitment to improve and
develop the Hi-Velocity System. “We look forward to our Grand
Re-opening in May, and greeting existing customers as well as
welcoming new customers,” said Leon. “Now, we not only talk the
talk on efficiency and sustainability, but also walk the walk
and lead by example.” 
What are Hi-Velocity SystemsTM?
The Hi-Velocity System is an energy efficient high pressure air delivery system that can be designed to provide heating, cooling, filtration, ventilation, humidification and dehumidification. The Hi-Velocity SDHV (Small Duct High Velocity) System works on the principle of pressure rather than air velocity. It is quite different than a conventional furnace, the main difference being that the supply duct work is all "small diameter" or "mini duct". This makes it very easy to install inside existing walls with minimal remodelling. The flex duct fits inside a typical framed wall without having to disturb the drywall. Our fan coil is modular and fits easily in mechanical rooms, closets, attics, crawlspaces, anywhere! The small footprint makes it the right choice for both new construction and retrofits.
What makes us different? With a pressurized small duct we
condition the air differently than conventional forced air systems. With
the use of a high pressure area to low pressure area, we continuously
mix the room air, creating even temperatures from floor to ceiling.
Because the plenum duct is pressurized, dust build-up within the duct
work is eliminated. With continuous air circulation from the constant
fan, airborne dust and other allergens can be easily filtered out of the
air. Air from our unique round outlets is mixed thoroughly,
eliminating "hot and cold spots" commonly found with conventional
systems.
How does this benefit
you? Our innovative fan coil and
unique cooling module technology helps create a healthier and more
enjoyable indoor living environment for the end-user, while saving
money on monthly operating costs. The Hi-Velocity System can remove up
to 30% more moisture from the air than conventional systems, leaving a
constant and comfortable temperature on the skin surface. The innovative
fan coil and unique heating and cooling technologies help create a
healthier and more enjoyable indoor living environment, and the Energy
Smart Variable Frequency Drive Motor will help save money on your
heating bills. 
How we Provide these Benefits:
• Hi-Efficiency programmable Energy Smart Motors with Variable Frequency Drive
• Our fan coil units are modular, conveniently located, and can be installed in a variety of orientations, with many available application options
• Our 2" & HE flex duct delivers air under a greater pressure than a conventional system. This increase in pressure forces the mixing of the air in the room, eliminating stratification
• Our flex duct is insulated to prevent heat loss/gain and has a sound absorbing inner core to deliver the air whisper quiet
• Smaller duct also allows for greater flexibility in installations while saving space
• Vents are adjustable and can be installed in the floor, ceiling or wall in a variety of styles to blend in with their surroundings
The Hi-Velocity System can be utilized for most projects, but some typical installations are commercial, new residential construction and the retrofit market. With the versatility, quick installation and superior Indoor Air Quality provided from our systems, they are now a popular choice with home builders, installers and the end user.
-
How the Hi-Velocity System can Improve your Indoor Air
Quality:
• Even temperature throughout the structure
• Filtration
• Fresh air make-up
• Humidification
• Dehumidification
• Reduce conditions that promote mold and mildew
For all of your heating, cooling, and Indoor Air Quality needs, the Hi-Velocity System is the right choice for you!
Home |
About Us |
FAQ's |
Search |
Technical Support |
Contact Us
